Dodge Intrepid OEM 3 Button Key Fob

6,99 $

SKU: SKUxKs2u3CnTW Categories: A-F, Dodge, Shop By Car Make Tag: Dodge Brand: Dodge

Description
Reviews (0)

This is a Factory OEM (Original Equipment Manufacturer) Dodge Intrepid 3 Button keyless entry remote, aka “key fob”.

Compatibility

1993-1997 Dodge Intrepid

Programming

93-96 Dodge Intrepid

Obtain all remote transmitters for this vehicle.

1.Remove the middle vent bezel from the center of the dashboard. Locate the 6 pin traction control connector behind the vent. It will be black in color. Connector should be connected to the vent bezel or the traction control switch, if connected to the traction control switch you must unplug it.

2. Insert key into ignition and turn ignition switch to the ON position.

3. Using a jumper wire or a paper clip bent in the shape of a “U” jump pin 1 to pin 4. Ensure there are metal contacts or pins in cavities 1 and 4. When done properly the doors will automatically lock and then unlock to show that vehicle is in programming mode.

4. Press any button on the first remote to be programmed. Locks will cycle again to indicate vehicle recognized remote. If programming a second remote press any button on second remote to be programmed, locks will cycle again to indicate that second remote was recognized.

5. Programming is now complete, turn ignition to OFF position, remove jumper wire, and test remotes to ensure proper programming.

97 Dodge Intrepid

Obtain all remote transmitters for this vehicle.

1.Insert key into ignition and turn ignition switch to the ON position. (Turn as far as you can without cranking the engine)

2. Locate the Data Link Connector (DLC). It will be under the dash on the drivers side. Using a suitable jumper wire, jump pin 1 to pin 4. Ensure that there are metal connector ends in the cavities that are referenced in this procedure. Once the jumper wire is installed it needs to remain there throughout this process until instructed to remove.

3. Press any button on the first remote to be programmed. If the signal is recognized the vehicle will Lock then Unlock the doors automatically.

4. Repeat step 3 for any additional remotes to be programmed. The doors will again Lock then Unlock automatically after each successful remote programming.

5. Remove jumper wire and remove key from ignition as programming is complete. Test each remote to ensure proper programming.

Before You Purchase

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

Our Products:

The key fob you are going to purchase from us is used or as we like to say “previously loved”. We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!

Dodge Intrepid OEM 3 Button Key Fob

Reviews

There are no reviews yet.

Dodge Intrepid OEM 3 Button Key Fob

Reviews

Be the first to review “Dodge Intrepid OEM 3 Button Key Fob” Cancel reply

Related products

Login