Ford Lincoln 3L7T-15K601-AA OEM 5 Button Key Fob

This is a Factory OEM (Original Equipment Manufacturer) Ford 5 Button keyless entry remote, aka “key fob”.

You will receive one of the listed interchangeable part numbers.

Ford

• 2003-2009 Ford Expedition
• 2003-2008 Lincoln Navigator

PLEASE NOTE: When you begin the programming sequence to sync your remote to your installed remote keyless entry (RKE) system, you MUST HAVE ALL OF YOUR REMOTES (Including PREVIOUSLY PROGRAMMED remote(s)) to be programmed with you at the time of programming.
ALL PREVIOUSLY PROGRAMMED REMOTES WILL BE ERASED AT THIS TIME.

There are two possible procedures for Ford Expedition.

Procedure #1 for Ford Expedition:

1. Turn ignition from OFF to RUN 5 times within 10 seconds, with the 5th time ending in RUN. Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Procedure #2 for Ford Expedition:

1. Gather all remotes.

2. If vehicle is equipped with memory seats program the No. 1 remote (marked on back of remote transmitter) 1st and the No. 2 remote second, etc.

3. Switch the ignition from off to ON 8 times within 10 seconds

4. The doors should lock then unlock

5. Within 7 seconds push any button on first remote

6. The doors should lock then unlock

7. Within 7 seconds push any button on second remote

8. The doors should lock then unlock

9. Within 7 seconds push any button on third remote

10. The doors should lock then unlock

11. Within 7 seconds push any button on fourth remote

12. The doors should lock then unlock

13. If door locks dont operate: Wait a few seconds and then push the remote button again.

14. Turn ignition to off position. Doors should lock and unlock (remote is programmed)

Procedure for Lincoln Navigator:

1. Close all doors and then open drivers door and press the UNLOCK button on drivers door panel while door is open and insert key in ignition.

2. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode.

3. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.

4. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:

You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

Our Products:

The key fob you are going to purchase from us is used or as we like to say “previously loved”. We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!

3L7T-15K601-AA Factory 5 BUTTON OEM KEY FOB Keyless Entry Car Remote Alarm

3L7T-15K601-AA
CAN: 1788A-FWB1U551
FCC ID: CWTWB1U551
3L7T-15K601 AA

5 BUTTON