GM 10246215 OEM 4 Button Key Fob

6,99 $

SKU: SKUhVj5TgvcsY Categories: A-F, Buick, L-O, Oldsmobile, P-Z, Pontiac, Shop By Car Make Tag: Gm Brand: Gm

Description
Reviews (0)

This is a Factory OEM (Original Equipment Manufacturer) GM 4 Button keyless entry remote, aka “key fob”.

Genuine OEM electronics in a new aftermarket case.

Compatibility

1997-2000 Buick Century
1997-2000 Buick Regal
1998-2000 Oldsmobile Intrigue
1998-2000 Pontiac Grand Pix

Programming

NOTE: There are two programming procedures.

PROCEDURE #1-For Pontiac

IMPORTANT: Before entering programming mode, have in possession all of the remotes you will be using on the vehicle. Once you program a new remote all previous remotes that were programmed will be erased from memory. The other remotes will not be functional until you program them again using the instructions below.

1. Remove key from the ignition.

2. Remove the MALL /BCM PGM Fuse from the fuse box. Fuse will be named MALL or BCM. Use the legend on the fuse panel or owner’s manual to properly locate the ‘MALL/BCM PGM’ fuse.

3. Close all doors and insert key into the ignition. Turn ignition to ACC then back to OFF then back to ACC. (do this step quickly, you will end in the ACC position) IMPORTANT: ACC is the position all the way back towards you, OFF is the position where you can remove the key from the ignition.

4. Open and close driver side door, vehicle will chime signaling programming mode.

5. Press and hold the LOCK and UNLOCK buttons down on the remote you are programming. Vehicle will chime twice signaling successful programming. Repeat this step for additional remotes you would like to program to this vehicle.

IMPORTANT: After 7 seconds, a chime may be heard confirming successful synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.

6. Remove key from ignition.

7. Install the ‘MALL/BCM PGM’ fuse back into the fuse panel and test remote(s).

8. Programming is now complete.

PROCEDURE #2-Buick & Oldsmobile

1. Collect all remotes that you wish to program. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.

2. Close all doors, turn key in ignition to ON position do not start car, then turn back to OFF. Remove key from ignition.

3. Hold Unlock button on the driver’s door. DO NOT RELEASE UNLOCK BUTTON

4. Insert key into the ignition and remove it, insert key into ignition and remove it, insert key into ignition and leave it in the ignition. (Do not turn key in the ignition)

5. Release the unlock button, three chimes will sound signally entering of programming mode.

6. Hold lock and unlock on the remote until the vehicle chimes twice signaling programming. Repeat this step for any additional remotes.

7. Remove key from ignition to exit programming mode.

Before You Purchase

OEM Key Fobs:

We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:

You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.

Our Products:

The key fob you are going to purchase from us is used or as we like to say “previously loved”. We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!

10246215 OEM 4 Button Key Fob

Reviews

There are no reviews yet.

Be the first to review “GM 10246215 OEM 4 Button Key Fob” Cancel reply

Sale!

GM 10246215 OEM 4 Button Key Fob

Reviews

Be the first to review “GM 10246215 OEM 4 Button Key Fob” Cancel reply

Related products

Login